RSTX-120187

Product information

Pressure tester / manometer for AdBlue® / SCR systems urea solution

Modern diesel emission systems have an integrated process for cleaning the exhaust gases. One of the most common systems does this by using a urea solution, such as AdBlue®, which is added before the catalytic converter to convert the nitrogen oxides leaving the engine into nitrogen and water. If such a system fails, the engine first switches to emergency operation. If the fault is not corrected, the OBD system may prevent the vehicle\'s engine from starting. The diagnostic routine for these SCR (Selective Catalytic Reduction by Adblue® Injection) systems includes electronic pressure measurement via the OBD software and protocols, and dynamic pressure measurement via pressure test gauges.

This instrumentation allows manual testing to be performed quickly and easily and the plausibility of the sensors to be checked.
The system pressure is preferably measured directly at the injector of the dosing module or directly at the pump in series.
Please note: it is not permitted to move the vehicle while the pressure test set is connected.
The measuring tool set consists of a pressure manometer with quick couplings, extension hoses are also included to attach the test set in inaccessible places.

Scope of delivery:
Manometer and connecting hoses so that the user can measure the system pressure directly at the injector (dosing module) or at the pump.




Pressure test / AdBlue® management / SCR solution systèmes.


The modern diesel emission systems are part of the integrated processes for the gas escapement. The more current systems are used for a solution to be used, to tell the AdBlue®, which are used in the catalytic converter for the conversion of the oxides of the azote to the engine and azote et al. eau. And because of the failure of the telephone system, the motor passe d\'abord and mode d\'urgence. Since the breakdown is not corrected, the OBD system is used to operate the vehicle\'s engine. The diagnostic routine of the SCR systems (reduction catalytic converter by injection of Adblue®) comprends the measurement of the pressure électronique via the logic and the OBD protocols, and the measurement of the pressure dynamics via the pressure test manometers.

Thanks for the ensemble d\'outils, the manual tests are carried out quickly and easily, and the plausibility of the capture methods can be verified.
The pressure of the system is the preferred method of directing the injector of the dosage or directing the pump in the series.
Take note of how the vehicle moves through the ensemble to test the pressure connection.
The jeu d\'outils de mésure se compose d\'un manomètre à pression avec des raccords rapides. Des tuyaux d\'extension sont également inclus pour fixer le jeu d\'essai dans des endroits inaccessibles.

Etendue de la livraison :
Manometer and method for using the utilizer to measure the pressure of the direct injection system at the level of the injector (dosage module) of the pump.